Yukon EXTEND LRS-1000 User Manual download pdf (Page 6)

External appearance and controls

Lens/Emitter

Signal receiver

Eyepiece

“ON” Switch

“Mode” Switch

Battery compartment

Battery cap

Reading the LCD display

“Ready” – indicates that the unit is ready for

use.

“Range” – range measurement function is

activated.

“Speed” – speed measurement function is

activated.

“ ” – indicates laser signal transmission.

“ ” – target indicator. Aiming mark –

centre this over a target.

“ ” – distance is shown in four digits. In

case of error four dashes show up “----”.

“KM/h” – indicates speed (kilometers per

hour), “M/S” (meters per second). Indications

“M” (meter) and “Y” (yard) are used in range

measurement mode.

“Quality >>>>> ” – target quality indicator.

“ ” – low battery indicator.

Battery installation

Unscrew the battery cap counterclockwise (7).

Insert a CR2 battery observing polarity shown in the battery

compartment (see diagram on page 2).

Replace the battery cap, screwing it on clockwise. Do not

overtighten.

CR2/3V

1 2 3 4 5 6 7 8 9 10 11 ... 25 26

No comments

Yukon EXTEND LRS-1000 User Manual Page 6